Creating a virtual network ZeroTire One and connecting to it

Creating and configuring a ZeroTire network

  1. Go to ZeroTire website.

  2. Sign up on ZeroTire.

  3. Go to your account.

  4. Click on the Create A Network.

  5. After that, you will see the network you created, its ID and name. Click on the network to configure it.

  6. In the window that appears you can change the network name and connection privacy.

  7. Scroll down to the Members column. It will say that there are no users on the network.

  8. Devices connected to the network will be displayed in this column. To allow them to connect to the network, activate the Auth? checkbox. The connected device will automatically be given an internal IP address, which will then be used to communicate with this device.

    specify names for new devices, it will help you distinguish them from each other in the future.

  9. Repeat the last step for all the devices that you want to connect.

    ZeroTire network supports up to 50 users simultaneously for free use.

Setup on Windows

Installing the app

  1. Go to the ZeroTire website.

  2. Click on the Windows icon.

  3. Download and run the Zero Tare One.msi file.

Network connection

  1. Run ZeroTire One.

  2. Click on the ZeroTire One icon in the taskbar.

  3. Click on the Join Network... to connect to the network.

  4. In the window that appears, enter your network ID and click Join.

  5. Allow using the new network.

Setup on iOS

Installing the app

  1. Go to the ZeroTire website.

  2. Click on the iOS icon.

  3. Install the ZeroTire One app.

Network connection

  1. Run ZeroTire One app.

  2. Click on + to add a new connection.

  3. Confirm the privacy policy.

  4. Enter your network ID and click Add Network.

  5. Confirm adding the new VPN configuration.

  6. Connect to the VPN network by sliding the network activation slider.

Setup on Linux (PC, Raspberry Pi)

Installing the app

  1. Open the console by pressing the keyboard shortcut ctrl + alt + t or type terminal in the program search bar.

  2. Enter the Zero Tare installation command.

     curl -s  https://install.zerotier.com  | sudo bash
    

Network connection

  1. Open the console.

  2. Enter the command sudo zerotire-cli join network-id, where network-id is your network ID.

  3. If the connection is successful, the corresponding message will be displayed in the console.

Installing and configuring on macOS

Installing the app

  1. Go to the ZeroTire website.

  2. Click on the macOS icon.

  3. Download and run ZeroTire One.pkg file.

  4. Install the ZeroTire One app.

Network connection

  1. Run ZeroTire One app.

  2. Click on the ZeroTire One icon in the taskbar .

  3. In the window that appears, click on Join Network....

  4. In the Enter Network ID field, enter your network ID.

Connecting to the copter

  1. Make sure that ZeroTire is working and connected to the network on the drone and control device. To do this, make sure that these have an Online status.

  2. Make sure that all devices have local IP addresses - Managed IPs.

  3. Open GQC and in the Comm Links tab add a TCP connection specifying the IP of the drone. Read more about remote connection here.

results matching ""

    No results matching ""